Here at Scottsdale Quality Pool Repair, we do 4.8-star-rated pool repairs with 20+ years of experience, such as pool pump replacement, crack repair, and resurfacing in Queen Creek, AZ.
Get a FREE Quote
Licensed and certified by 4 PHTA certifications
15,000+ pool services completed

When our team saw the pool, we observed the travertine deck was uneven and loose, with sunken pavers around the skimmer, washed-out joint sand, and a few cracked pieces that caught bare feet. Our specialists with 4 PHTA certifications lifted and reset the settled sections, replaced the broken pavers, re-leveled and compacted the base, laid a fresh sand bed, re-sanded the joints with polymeric sand, and sealed the surface after curing. The deck is now smooth and safe again, even their dog likes it!
Price: $12,300
Turnaround time: 9 business days on-site

Back then, before we did our services, the rock waterfall was dry and stained, with cracked mortar joints, a weak pump feed, and chalky calcium streaks running down the rock face. Our 20-year-service crew re-sealed the rock joints with pool-grade mortar, repaired the feed plumbing, cleaned the mineral staining, balanced the flow over each ledge, and repainted the rock face to match. Now the waterfall feels and sounds like a tropical vacation in Hawaii.
Price: $5,500
Turnaround time: 5 business days on-site

Before our squeaky clean pool washing service, the pool interior was dulled by mineral staining and faint algae shadows, with patches on the steps and a waterline that never looked truly clean. Our specialists drained the pool, power-washed the walls and floor, applied diluted muriatic acid with an acid brush, scrubbed the stained sections, neutralized the residue with soda ash, rinsed, refilled, and balanced the fresh water. The homeowners are happy as the service is way cheaper and lightning fast than a full resurfacing.
Price: $775
Turnaround time: 1 business day on-site
Scottsdale Quality Pool Repair has been fixing pools across the Valley since June 2005. In more than 20 years, the team has completed over 15,000 pool services. That work has shown them exactly how the Sonoran Desert wears down pool shells, plumbing and equipment. Homeowners in Queen Creek, AZ see 100°F or higher on about 103 days a year. Pumps run longer and water evaporates faster as a result. Small leaks also turn into big repair bills sooner than they would in a milder climate.
Each repair is handled under an Arizona ROC CR-6 license. This license covers both residential and commercial pool service and repair. The eight-person crew also holds four PHTA certifications. These are the Certified Pool & Spa Operator (CPO), Certified Pool & Spa Service Technician (CST), Certified Pool & Spa Maintenance Specialist (CMS) and Certified Pool & Spa Service Professional (CSP). Together, they mean the technician at the gate understands water chemistry, hydraulics and equipment diagnostics. Swapping out a part is only one piece of the job.
Monsoon season runs from July to mid-September. It brings dust storms and sudden downpours that clog skimmers and overload filters. Water balance can also shift overnight. Crews plan for that rush by keeping common filter, pump and valve parts on hand. A pool in a newer subdivision near Ellsworth Road doesn’t sit green for a week waiting on a part. The same goes for homes out in Ironwood Crossing on the Pinal County side. Nearly half of Queen Creek households have kids at home. Safety repairs like broken drain covers, loose handrails and faulty gate latches always go to the front of the line.
A 4.8 star rating speaks for itself. So does the fact that 9 out of 10 clients recommend the company. Those numbers come from showing up when promised and explaining each fix in plain language. Every job is fully insured and backed by a written workmanship warranty. The same standards follow the crew wherever the work takes them. A commercial pool in Peoria, AZ gets the same care as a backyard pool off Queen Creek Road. HOAs and community pools are treated with the same attention to detail as private homes.
Queen Creek started as the farming community of Rittenhouse. It has since grown into one of the fastest-growing towns in the Valley. Many of its backyard pools went in over the last 15 to 20 years. Those pools are now reaching the age where plaster, tile and equipment need real attention. Scottsdale Quality Pool Repair chooses materials based on how well they handle intense UV exposure and hard water. The wide gap between summer highs and winter lows matters too.
Arizona’s hard water leaves calcium scale along waterlines. Over time, it also etches older plaster. For that reason, resurfacing jobs often move to pebble or quartz aggregate finishes. These resist staining and last much longer. Cracked or loose tile is replaced with frost-proof porcelain. It is then set with polymer-modified thin-set made to handle expansion in triple-digit heat. Coping repairs use materials that stay cooler underfoot. That matters when the deck sits in full sun most of the year.
Pumps, heaters and filters are matched to the pool’s actual volume and flow needs. Oversizing is avoided because it drives up energy bills when equipment runs long hours through the summer. Variable-speed pumps, UV-resistant PVC and properly rated fittings are standard on equipment pad repairs. Leak detection starts with pressure testing and dye testing. Nothing gets cut open until the source is confirmed. Guessing at plumbing problems only costs homeowners time and money.
Every repair ends with a water chemistry check and a full equipment run test. The owner then gets a walk-through of the finished work. The team sweats the small details at this stage. A missed hairline crack or a slightly loose union fitting is exactly what fails first in the heat. Families across Queen Creek, AZ end up with a pool ready for the next weekend gathering. It’s also ready for a cool evening swim after a hike in San Tan Mountain Regional Park.